top of page

Epoxy Resin A+B Set

OTTER EPOXY RESIN / HARDENER is a high quality  liquid resin in 2 parts (A) and (B) system. It gives a crystal clear, beautiful, good transparency, water resistant property to table top, home decoration, art and crafts, jewellery and etc.

 

Watch Video

 

Benefits : 

  • Clear Gloss
  • Self Levelling
  • Good Flexibility and Colour Retention
  • Non Flammable
  • Solvent Free
  • Water Resistance

 

How To Use :

  • Recommended application thickness per layer :  1 to 1.5cm
  • Mixing Ratio (By weight)
  • Fast Drying:   (A) Resin  :  (B1) Hardener  =   1kg  :  0.6kg
  • Slow Drying:  (A) Resin  :  (B2) Hardener  =   1kg  :  0.3kg

 

Accurately measure both resin and hardener according to ratio, determine how much you will need to use at a time. Prepare a bowl / container, make sure is clean of dust or water. Pour (A) into the clean bowl / container and then slowly pour (B) into (A). Use chopstick or other tools to stir slowly so it would not get bubbles, scrap the sides and bottom several times during mixing. Stir for 2 to 3 minutes and let it settle down for about 5 minutes to allow air bubble to rise up if any. Bubble can be removed by using toothpicks to float up slowly and will disappear.

 

Curing/Drying Time (room temperature 30ºC)

(A) + (B1) Fast Drying Mixture -  Touch Dry  :  3 to 4 Hours   Fully Cure  :  7 Hours Onwards

(A) + (B2) Slow Drying Mixture - Touch Dry  :  6 to 7 Hours   Fully Cure  :  10 Hours Onwards

 

Coverange: 1kg Mixture Covers 10 sq.ft. at 1mm Thick

Shelf Life (Unopen): 18 months

You Might Also Like

bottom of page