Woodkare
Crystal Acrylic
Lacquer
    Wood-Kare
Diamond Poly
Kote
    Wood-Kare
Ultra Timber
Protector
    Wood-Kare
DIY "Gelled"
Stain
     
                    Wood-Kare
Wood Filler
 
 
 
 
Wood-Kare Ultra Timber Protector
 
WOOD-KARE ULTRA TIMBER PROTECTOR, it’s a premium quality deep penetrating non-drying oil based waterproofing sealer, contains special ultra-violet additive and choosing special oil formulated to provide long lasting beautiful natural colour and have excellent resistance to protects your wood from U.V. rays and prevent woods from warping, splitting, insect attack and also helps your wood against fading.
Key Features:
What makes WOOD-KARE ULTRA TIMBER PROTECTOR special?
* Unlike polyurethane varnish which forms a thick surface that can crack, loosenand end up looking sticky and artificial.
* It’s very different from other finishes because it penetrates deep into wood. Not On the wood. The finish penetrates deep into wood pores where it solidies to harden the wood drap moisture so it’s eliminating cracking, peelingand blistering.
* Recoating after old finish from the surface. Most scratches and blemishes can be repaired easily on the spot with additional wood oil. So no difficult task require compared with varnish.
Offer more way protection:
* SUNBLOCK -
-
Maximum U. V. protection.
Prevent wood cracking, splitting and also help wood against fading on discolour wood.
* WATER REPELLENT - Minimise wood from warping, splitting and cracking.
* PRESERVES - Mildew resistances, substain and wood rot.
* SPECIAL OIL - It is one of the most water resistant oils.
Preserves and protects:
* Pergola
* Outdoor Furniture
* Wooden Shingles
* Wooden Fences
* Wooden Doors & Frames
* Wooden Bridge
* Plywood
* House Siding
* Seasaws or Wooden Decks
Application And Preparation :
1. For best result on wood that has weathered or discoloured from mold, substain or mildew, clean surface complete with Wood Bleach. (e.g. Remove water marks and substains.) Let the surface dry completely before apply WOOD-KARE ULTRA TIMBER PROTECTOR.
2. Apply by brush or roller and wipe with clean cloth dry after 5 minutes.
Helpful Hints
Only two wet coat is recommended however for extra durability and protection you may apply third coat, allow the first coat to curve at least 4 hours.
Clean Up
Soap and water or thinner.
 
     
 
HOME | I I I I